SD2500 (2500W)
SD2500 (2500W)
SD2500 Features
Parallel redundancy design for power expansion
1Ф3W / 3Ф4W for multiple industrial applications
Built-in ATS and AC circuit breaker
Selectable output voltage and output frequency
Optional STS module, transfer time less than 4ms.
RS-232 communication interface
Input & output fully isolation
Output voltage / power saving mode selectable by DIP switch or remote control (via CR-10)
Input protection: Reverse Polarity (Fuse) / Under Voltage / Over Voltage
Output protection: Short Circuit / Overload / Over Temperature / Over Voltage
E13 / UL / CE / FCC approved
Accessory:
Remote controller CR-6
Remote controller CR-8
Remote controller CR-10
| MODEL | SD2500-112, SD2500-124, SD2500-148, SD2500-212, SD2500-224, SD2500-248 |
|---|---|
| Main Features | ◎ Output parallelable pure sine wave inverter up to 12.5KW ◎ Support 1Ф3W / 3Ф4W ◎ Built-in AC(Grid) by-pass switch |
| AC Output Voltage | 100/110/115/120VAC ± 3%; 200/220/230/240VAC ± 3% |
| Rated Power | 2500VA |
| Surge Power | 4000VA |
| Output Waveform | Pure Sine Wave (THD < 3%@ Normal Load) |
| Frequency | 50/60 Hz ± 0.1% |
| DC Output Voltage | ─ |
| DC Output Voltage Range | ─ |
| DC Input Voltage | 12V; 24V; 48V |
| DC Input Voltage Range | 10~16VDC; 20~32VDC; 40~64VDC |
| Efficiency | 88%; 89%; 90%; 88%; 88%; 90% |
| Operating Temperature | -20~60℃, refer to de-rating curve |
| Storage Temperature | -40~70℃ |
| Safety | CE / FCC / UL (only for 112/124 Hard wire) / E13 |
| Dimension (WxHxD) | 283x128x436 mm |
| Weight (Net) | 8kg |
| Socket Type | GFCI / NEMA 5-15R / GE / AU / UK / Hard Wire |
Unit：mm [inch]